CCNDN - AQUATAPOXY GEL SYSTEM A-7 PART A, 35-200
- MSDS: CCNDN
- Manufacturer: AMERICAN CHEMICAL CORP
- Product Name: AQUATAPOXY GEL SYSTEM A-7 PART A, 35-200
- National Stock Number: 8040-00N021600
Product Identification
Product ID:AQUATAPOXY GEL SYSTEM A-7 PART A, 35-200
MSDS Date:01/18/1993
FSC:8040
NIIN:00N021600
MSDS Number: CCNDN
Responsible Party
ST LOUIS, MO 63110
US
Emergency Phone: 800-633-0247
Info Phone: 314-664-2403
Cage: OBTX0
Contractor
Telephone: 314-772-9953/800-233-8171
Cage: 0SS34
Ingredients
TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 8-11%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
CLAY (KAOLIN); (KAOLIN)
CAS: 1332-58-7
RTECS: GF1670500
Fraction By Weight: 15-20%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 2 MG/M3 TDUST
SILICA GEL; (SILICA)
CAS: 112945-52-5
RTECS: VV7310000
Fraction By Weight: 25-30%
OSHA PEL 6 MG/M3
ACGIH TLV: 10 MG/M3
EPOXY RESIN
CAS: 25085-99-8
OSHA PEL N/K
ACGIH TLV: N/K
MAGNESIUM ALUMINUM SILICATE; (HYDROUS ALUMINUM SILICATE)
CAS: 8031-18-3
OSHA PEL N/K
ACGIH TLV: N/K
REPRESENTATIVE OF CURRENT MFRING PROCESSES IS NOT
RTECS: 9999999ZZ
MUTAGENICITY TESTS IN ANIMALS HAVE BEEN NEGATIVE. HAS
RTECS: 9999999ZZ
("TEST TUBE") MUTAGENICITY TESTS AND POSITIVE IN
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:LD50(ORAL,RAT):>4000 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES:MAY CAUSE SLIGHT TRANSIENT
(TEMPORARY) IRRIT. CORNEAL INJURY IS UNLIKELY. SKIN:MAY CAUSE
ALLERGIC RXN IN SUSCEPTIBLE INDIVIDUALS. PRLNGD EXPOS NOT LIKELY TO
CAUSE SIGNIFICANT IRRIT. RPTD EXPOS IS NOT LIKELY TO RSLT IN MATL
BEING ABSORBED IN HARMFUL AMTS. INHAL:VAPS ARE UNLIKELY DUE TO
PHYSICAL (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLT HAZS:PROPERTIES. INGEST:SINGLE DOSE TOX IS
LOW. NO HAZS ANTIC INCIDENTAL TO INDUST EXPOS. SYSTEMIC & OTHER
EFTS:EXCEPT FOR SKIN SENSIT, RPTD EXPOS TO LOW MOLECULAR WEIGHT
EPOXY RESINS OF THIS TYPE ARE NOT ANTIC TO CAUSE ANY
SIGNIFICANTADVERSE EFTS. POORLY CHARACTERIZED SAMPLE OF LOW
MOLECULAR WEIGHT EPOXY (SUPDAT)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O*2/ARTF RESP) . EYES:IMMEDIATELY FLUSH
W/POTABLE WATER FOR A MINIMUM OF 15 MINUTES, SEEK ASSISTANCE FROM
MD . SKIN:FLUSH W/COPIOUS AMOUNTS OF WATER. CALL MD .
Fire Fighting
Flash Point Method:TCC
Flash Point:>200F,>93C
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH APPRVD SCBA & FULL PROT EQUIP .
WATER MAY BE HELPFUL IN KEEPING ADJACENT CNTNRS COOL. AVOID
SPREADING BURNING LIQ W/WATER USED FOR (SUPP DATA)
Unusual Fire/Explosion Hazard:KEEP WORK AREAS FREE OF HOT METAL
SURFACES AND OTHER SOURCES OF IGNITION.
Accidental Release
Spill Release Procedures:KEEP SOURCES OF IGNITION AND HOT METAL
SURFACES ISOLATED FROM THE SPILL. MATERIAL MAY FLOW SLOWLY. SCRAPE
INTO CONTAINERS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
USE. AVOID PROLONGED OR REPEATED CONTACT WITH SKIN. DO NOT HANDLE
OR STORE NEAR FLAME, HEAT OR STRONG OXIDANTS.
Other Precautions:DO NOT STORE IN DIRECT SUNLIGHT. AVOID PROLONGED
STORAGE ABOVE 38C (100F).
Exposure Controls
Respiratory Protection:RESPIRATORY PROTECTION SHOULD NOT BE NEEDED. IF
RESPIRATORY IRRITATION IS EXPERIENCED, USE A NIOSH APPROVED
AIR-PURIFYING RESPIRATOR.
Ventilation:GENERAL MECHANICAL VENTILATION IS SUFFICIENT FOR MOST
CONDITIONS. LOCAL EXHAUST VENT MAY BE NEC FOR SOME OPERATIONS.
Protective Gloves:THE USE OF IMPERMEABLE GLOVES IS REQ.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPROVED EMERGENCY EYE WASH AND DELUGE
SHOWER . WEAR CLEAN, LONG-SLEEVED, BODY COVERING CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRE FIGHT PROC:COOLING PURPOSES. EFTS OF OVEREXP:RESIN OF THIS TYPE
(DIGLYCIDYL ETHER OF BISPHENOL A) HAS BEEN RPTD TO PROD SKIN CANCER
IN HIGHLY SENSITIVE STRAIN OF MICE. HOWEVER, HIGH LEVELS OF IMP
URITIES (INCLUDING A KNOWN ANIMAL SKIN CARCIN) COMPROMISE VALIDITY
OF FINDINGS. EPOXY RESIN THAT IS (ING 6)
Chemical Properties
Boiling Pt:B.P. Text:>200F,>93C
Spec Gravity:1.24
Solubility in Water:NEGLIGIBLE
Appearance and Odor:MASTIC CONSISTENCY-FAINT EPOXY ODOR.
Percent Volatiles by Volume:<1
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND BASES, SELECTED AMINES, OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:THERMAL DECOMPOSITION IN THE PRESENCE
OF AIR MAY YIELD CARBON MONOXIDE AND CARBON DIOXIDE.
Disposal
Waste Disposal Methods:DISPOSE OF ACCORDING TO ALL LOCAL, STATE AND
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.